Technical Features:
1. CO2 laser, it's suitable for engraving and cutting acrylic,wood and many other non-metal materials.
2. Ruida DSP controller, it can make the machine work off line, engrave on both flat and slope by 360 degree.
3. It can re-carve after break point or power off.
4. Coreldraw,Autocad,etc. can output files into the machine directly.
5. Drive Mode: Square guide rails and belts
6. The laser tubes adopt Industrial chiller to be cooled, it can make the laser tube at a certain temperature.
7. The user could know the processing time on the panel before he or she start the work.
8. You could choose different power laser tubes for the machine according to your work.
Aplicable Industries:
Model industry(Construction models, aviation models, navigation models and wooden toys), advertising, decoration, art crafts, and electric appliances,etc.
Applicable Materials:
Non-metal materials such as acrylic, wood planks(Light planks), bamboo ware, double colour boards, paper, leather, shells, coconut shells, ox horns, resin animal grease, ABS boards, etc.
Technical Parameters:
| Model |
CM-6040 | CM-9060 |
| Laser Power | 40W/60W/80W |
|
| Laser Type |
CO2 Sealed Glass Laser Tube,Water Cooled,10.6μm | |
| Working Area | 600X400mm | 900X600mm |
| Control System |
Ruida Controller | |
| Cooling Type |
Water-cooled and Protection System |
|
| Engraving Speed | 50~24000mm/min | |
| Cutting Speed | 50~5000mm/min | |
| Laser Output Control |
1~100% Software Setting | |
| Minimum Letter Size | Chinese: 2.0X2.0mm,English: 1.0X1.0mm | |
| Highese Scanning Precision | 2500DPI | |
| Driving System |
Stepper Motor | |
| Transmission Type |
Taiwan Linear Square Guide Rails And Belts | |
| Worktable |
Blade Worktable(Up-down Worktable And Honeycomb worktable are optional) | |
| Operating Temperature |
0℃~45℃ | |
| Operating Humidity |
5%~95% | |
| Locationg Precision |
≤±0.01mm | |
| Supported File Format |
DST,PLT,BMP,DXF,AI,DWG,LAS | |
| Compatible Software |
Coreldraw,Autocad,Photoshop,etc. |
|
| Slope Engraving |
360° Slope Can Be Designed Easily | |
| Working Voltage | AC220V/50Hz,Single Phase(110V/60Hz is optional) |
|
| Packange Dimension |
155X156X127mm | 156X162X127mm |
| Net Weight | 200KGS | 300KGS |
| Gross Weight | 250KGS |
350KGS |
The Materials Which CO2 Laser Engraver And Cutter Can Engrave And Cut
| Material |
Engrave | Cut | Material | Engrave | Cut |
| Wood | Yes | Yes | Painted Metals |
Yes | No |
| Plastic | Yes | Yes | Coated Metals | Yes | No |
| Acrylic | Yes | Yes | Plywood |
Yes | Yes |
| Fabric | Yes | Yes | Press Board |
Yes | Yes |
| Rubber | Yes | Yes | Fiber Glass |
Yes | Yes |
| Leather |
Yes | Yes | Wood Veneer | Yes | Yes |
| Glass | Yes | No | Bamboo | Yes | Yes |
| Marble | Yes | No | Tile | Yes | No |
| Cloth | Yes | Yes | Corian | Yes | Yes |
| Matte Board | Yes | Yes | Cork |
Yes | Yes |
| Stone | Yes | No | Melamine | Yes |
Yes |
| Ceramic | Yes | No | Anodized Aluminum | Yes | No |
| Paper | Yes | Yes | Mylar |
Yes | Yes |
The thickness Of Materials Which CO2 Laser Engraver And Cutter Can Cut
| Material | The Max Cutting Thickness |
||
| 40W | 60W | 80W | |
| Acrylic | 3mm |
8mm | 10mm |
| Wood | 3mm |
5mm | 10mm |
| MDF | 3mm | 3mm | 5mm |
| Plywood | 3mm | 3mm | 5mm |
| Double Colour Board |
2mm | 2mm | 2mm |
| Remark | Other Non-metal materails can also be cut |
||
