Technical Features:
1. The stone laser engraver can engrave pictures and words on tombstone, gravestone, monuments,etc.
2. There is a lifter as the worktable, the user could move the stone to the inside of this machine for engraving, and move the stone out after finishing the engraving with the lifter.
3. There is a big hole at the back of this machine, so the machine can engrave very long materials, the material can go through the machine from the big hole.
4. Ruida DSP controller with USB interface,the customer could transmit the files into this machine with USB disc.
5. Multi-purpose ability,this machine can also engrave on plastic, rubber,foam and other non-metal materails.
Applicable Industries:
Stone processing, advertising,artcraft,etc.
Applicable Materails:
Stone, marble,granite,wood,acrylic,plastic,rubber and other non-metal materails.
Technical Parameters:
Model | CML-1060 | CML-1390 | CML-1610 |
Working Area |
1000X600mm | 1300X900mm | 1600X1000mm |
Controller | Ruida With USB Interface |
||
Laser Power |
80W | ||
Laser Type | CO2 Glass Tube,Water-cooled, 10.6μm Wavelength | ||
Cooling Type | Water-cooled And Protection System |
||
Engraving Speed | 50~24000mm/min |
||
Cutting Speed | 50~5000mm/min |
||
Laser Output Control | 1~100% Software Setting | ||
Minimum letter Size | Chinese: 2.0X2.0mm,English: 1.0X1.0mm |
||
Highest Scanning Precision | 2500DPI |
||
Drive Motor | Sub-division Stepper Motors |
||
Driver | Yako | ||
Drive Transmission |
X And Y Axes Both Adopt Belts | ||
Guide Rails | Taiwan PMP Linear Square Guide Rails |
||
Worktable |
No(Lifter is the worktable) | ||
Operating temperature |
0℃~45℃ | ||
Operating Humidity |
5%~95% | ||
Location Precision | ≤±0.01mm | ||
Supported File Format | DST,BMP,PLT,DXF,AI,DWG,LAS |
||
Compatiable Software | 360° Slope Can Be Designed Easily | ||
Working Voltage | AC220V/50~60Hz,Single Phase(Optional) |
||
Package Dimension |
165X136X139cm |
195X160X149cm | 225X170X149cm |
Net Weight | 350KGS |
410KGS | 450KGS |
Gross Weight | 400KGS | 460KGS | 500KGS |