Technical Features:
1. The machine can read the processing information automatically by scanning bar codes for drilling holes and slotting.It's suitable for customized and standard production, the wood boards with different location of the holes can be drilled together, no need dividing.
2. Granite worktable, the precision can reach 0.005mm,so it can increase the fitness of wood sheet and worktable, ensure the accuracy of horizontal holes.This worktable won't deform and keep the precision when the machine move with high speed.
3.Intelligent code scanning, one barcode scanner can be sued for the two workzone, easy operation.
4. Advanced algorithm for route optimization,import data with only one time, it can drill holes on sixe sides of one wood board with high accuracy and efficiency.
5. It can process the symmetrical holes and fillisters on the pros and cons of one wood board, so it can reallize diversification process, and double improve processing speed.
6.The four drill banks can work at the same time, if the wood boards only need be drilled holes on the five sides, the two sides which don't need be drilled holes could be overlied together, then the two boards could be drilled at the same time, this can save processing time greatly.
7.One clamp can finish the whole work without avoiding.
8.The two work zone can work at the same time, and they can also choose any work mode.
9.When the four drill banks work at the same time, the machine change over automatically after setting the dimensions for the wood boards.
10.The machine can check the dimension of the wood boards automatically, the outfeed front or back can be choosed.
Applicable Industries:
Wood panel furniture,advertising, die industry,etc.
Applicable Materials:
Wood,artificial plates, solid wood plates, semi-solid wood plates,MDF,etc.
Technical Parameters:
Six Sides Drilling Machine With Double Work Zone | |
Working Area | 5000X1250X200mm |
X And X1 Axes | 5000mm,130m/min |
A And A1 Axes | 5000mm,130m/min |
Y And Y1 Axes | 1250mm,90m/min |
U And U1 Axes | 1250mm, 90m/min |
Z And Z1 Axes | 200mm, 30m/min |
W And W1 Axes | 200mm,30m/min |
V And V1 Axes | 1250mm, 90m/min |
Upper Drill Bank | (12V+8H)*2 |
Under Drill Bank |
9V*2 |
The Motor Power For Drill Bank |
2.2KW |
Rotating Speed For Drill Bank | 4500rpm |
Spindle Power |
3.5KW*4,Two On The Upper, Two Under The Table |
Rotating Speed For Spindle | 18000rpm |
The Height For Wood Plate | 10~50mm |
The Width For Wood Plate | 30~1200mm |
The Min Dimension For Processing | 30*150mm |
X,X1,A,A1,Y,Y1,U,U1,V and V1 Drive Transmission |
Helical Rack And Pinion, Taiwan Hiwin Linear Square Guide Rails |
Z,Z1,W and W1 Drive Transmission | Taiwan TBI Ballscrew,Taiwan Hiwin Linear Square Guide Rails |
Worktable | Granite And Air Floating |
Controller | German Beifu |
Servo System | China Huichuan |
Total Power |
36KW |
Voltage | AC380V/50Hz,Three Phase(Optional) |
Net Weight | 6500KGS |